Description
Video
Video Standard PAL or NTSC (select via general setup menu, or auto detect on channel 1) 960H resolution support
Playback 960H: 960 x 576 (PAL), 960 x 480 (NTSC)
4CIF: 704 x 576 (PAL), 704 x 480 (NTSC)
2CIF: 704 x 288 (PAL), 704 x 240 (NTSC)
CIF: 352 x 288 (PAL), 352 x 240 (NTSC)
QCIF: 176 x 144 (PAL), 176 x 120 (NTSC)
Compression H.264
Input 8 Composite video 1 Vpp, 75 , CVBS (BNC)
Output 1 Channel Monitor A: CVBS (BNC)
1 Channel Monitor A: HDMI
1 Channel Monitor A: VGA
1 Channel Monitor B: CVBS (BNC)
Support for simultaneous CVBS/VGA/HDMI output to Monitor A
Monitor
Monitor A Live, playback, menus
VGA: Analog RGB maximum 1920 x 1080, 60 Hz
HDMI: Digital RGB maximum 1920 x 1080, 165 MHz
CVBS: 1 Vpp, 75 , BNC (NTSC/PAL)
Resolution MON.A:
CVBS (PAL): 704 x 576
CVBS (NTSC): 704 x 480
VGA: 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
HDMI: 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
960H Camera: 960 x 576 (PAL), 960 x 480 (NTSC)
720H Camera: 704 x 576 (PAL), 704 x 480 (NTSC)
Monitor B Live
Resolution MON.B:
CVBS (PAL): 704 x 576
CVBS (NTSC): 704 x 480
Audio
Input 4-Channel RCA (for 4-channel units), 200 to 3000 mV, 10 k (RCA)
Output Mono RCA, 200 to 3000 mV, 5 k (RCA)
Mic Input Mono talk input RCA, 200 to 3000 mV, 10 k (RCA)
Compression G.711A
Sample Rate 8 kHz per channel
Bitrate 8-bit
Controls
RS485 PTZ control port
Output signals according to RS485, maximum signal voltage -5 to +5 V
RS232 PTZ control port interface
Output signals according to EIA/TIA-232-F, maximum input voltage 10 V
Supported Protocols Pelco P and D (over RS-485)
Bosch OSRD (over RS-485 or RS-232)
Alarm
Input 16 inputs configurable NO/NC, maximum input voltage 5 VDC
Output 5 relay outputs, configurable NO/NC
Relay Contacts Maximum rated, 30 VDC, 2 A continuous or 125 VAC, 1 A (activated)
Connectors
Video Inputs: 4 BNC
Outputs (Loop-Through): 4 or 8 BNC (for 8-channel units)
1 x 25-pin D-type for 8-channel unit (connector cable supplied)
Monitor Outputs 1 VGA D-Sub
1 HDMI
2-channel BNC (CVBS)
Alarm Inputs: 16-screw terminal inputs
Cable diameter AWG26-16 (0.13 to 1.50 mm) Outputs: 5-screw terminal outputs
Cable diameter AWG26-16 (0.13 to 1.50 mm)
Audio Inputs: 4 RCA
Outputs: 1 RCA
Audio Audio (MIC): 1 RCA for talk input or output
Ethernet RJ45, 10/100/1000Base-T according to IEEE802.3
Keyboard Intuikey Keyboard (KBD Digital or KBD Universal):
Conforms to RS485
Maximum signal voltage 12 V
Power supply to keyboard 11 to 12.6 VDC at maximum 400 mA
RS485 Screw terminal output
RS232 DB9 male, 9-pin D-connector
e-SATA e-SATA connector for backup device
USB 2.0 1 x front and 1 x rear USB connector for mouse or USB memory device
External Power Input +12 VDC
Video Recording
Recording
Speed Maximum 30 IPS per channel (NTSC), configurable
Maximum 25 IPS per channel (PAL), configurable
Mode Manual, motion detection, scheduled, alarm
Network
View Alarm: External, motion detection, system alarms, and video loss
Audio Bi-directional (audio input and output connected via device)
Software PC: Bosch Video Client or Web Client
Playback
Multi-Channel Input Simultaneous 8 channels
Mode Frame-by-frame, slow play, fast play, reverse
Search Time, channel, type, smart
Alarm Handling
Motion Detection Detection Zones: 396 (PAL) / 330 (NTSC)
Video Loss Detection External alarm and screen prompt
Export Format
USB e-SATA:
Power
Input 100 to 240 VAC, 50 to 60 Hz 55 W
187 BTU/h
RTC Battery On Main PCB: Lithium CR2032, 3 VDC
Environmental
Temperature Operating: 32 to 104F (0 to 40C)
Storage: -40 to +158F (-40 to 70C)
Humidity Operating: <93% non-condensing
Storage: <95% non-condensing
PC Requirements
Operating System For Web Support: Windows XP, Windows Vista or Windows 7
Web Browser Safari, Chrome, Firefox (QuickTime required; no playback supported)
Internet Explorer 9 (playback supported)
Processor Intel Core Duo 2.0 GHz or comparable
RAM Memory: 2048 MB
Free Disk Space 10 MB
Graphics Card NVIDIA GeForce 8600 or better
Video Memory 256 MB
Network Interface 10/100/1000-BaseT
Certifications and Approvals
Standards EMC Directive: 2004/108/EC
EMC Immunity: EN 50130-4:2011
EMC Emission:
EN 55022:2010, +AC:2011 Class B conducted + radiated emission
EN 61000-3-2:2006, +A1: 2009, +A2:2009, mains harmonics
EN 61000-3-3:2008, voltage fluctuations
Environment: EN 50130-5 Class 1
Low Voltage Directive: 2006/95/EC
Safety: EN 60950-1:2006, +A11:2009, +A1:2010, +A12:2011, +AC:2011, USA: UL 60950-1: 2nd edition 2011-12-19 CAN/CSA C22.2 No.60950-1-07, 2nd edition 2011-12
FCC: CFR Title 47 Part 15:2009 class B
EMC Australia: C-Tick
Mechanical
Dimensions (W x D x H) 17.3 x 16.5 x 2.8" (440.0 x 420.0 x 70.0 mm), excluding cabling and feet 0.1" (5.0 mm)
Rack Mount Kit Included: For mounting one unit in an EIA 19.0" (482.6 mm) rack
Weight Approximately 12 kg
Box Dimensions (LxWxH) 23.1 x 21.4 x 8.6"